Many homeowners prefer installing wrought iron driveway gates to avail a number of benefits. In addition to keeping the property secure and inaccessible, the driveway gates further optimize its aesthetic appeal. But the gates remain exposed to harsh weather elements on a constant basis. The constant exposure to different weather conditions also make these gates vulnerable to rust. As the rust can cause huge damages to the iron driveway gates in the long run, you must remove rust without causing any slight delay. Read more about driveway gate repair Phoenix
Different Ways to Remove Rust from Your Driveway Gates
Smooth the Metal Surface: When you decide to remove rust from your driveway gates, it is important to make the metal gate surface smooth. You can use 30-grit sandpaper to rub the rusted areas of the gate till you see the bare metal. After rusting the gates, use a rag to wipe the rust dust away. Now the entire metal gate surface needs to be smooth using 80-grit sandpaper.
Scour the Rust: You can even use a wire brush to scour the rusted metal surface. Keep scouring till the corrosion is removed completely. Now the bits of rust can be wiped away using a rag.
Strip the Rust: Alternately, the rust can be stripped from the metal gate surface using a hand-held grinder with a wire wheel. The grinder can be turned on to strip the rust from the surface of the iron gate.
Use a Sandblaster: You can even consider blasting the rust away using a sandblaster filled with sandblasting media. However, it is important to use the sandblaster by standing away from the gate by at least 25 inches. After turning the sandblaster on, you have to move it slowly while targeting the sandblasting media towards the iron gate. Once the rust started coming away freely, you must adjust the sandblaster to blast the rust away. However, the nozzle of the sandblaster must be moved constantly to avoid causing any damage to the metal. Similarly, you must stay away from the gates to ensure that no damage is caused to it during the sandblasting process.
Apply Rust Remover: You will find several types of rust removers available in the market. The product also allows users to remove rust from metal gates without putting any extra time and effort. You can simply use a foam brush to apply the rust remover onto the iron gates. However, it is always important to read the manufacturer’s instructions to understand the proper way to apply the remover. After applying the rust remover, you must allow it to sit for about 30 minutes on the rusted metal surface. Finally, you have to use soapy water or any neutralized provided by the manufacturer to remove the rust and rust remover from your driveway gates.
It is always a good idea to evaluate different ways to remove rust. The comparison will help you in choosing the best option to make the gates rust-free. You can further make the wrought iron driveway gates sturdier by following the instructions share by the manufacturer. The timely maintenance will further reduce the chances of rust affecting the look, feel and performance of your driveway gates.